Vijay Laxmi Impex

EN42J is a high carbon, cold-rolled, and hardened and tempered spring steel strip. It has excellent strength and toughness, making it ideal for use in applications that require high-performance and reliability under stress and strain, such as springs and components in the automotive, aerospace, and engineering industries.

EN42J spring steel strips are typically produced through a process of cold rolling and then hardened and tempered to achieve the desired mechanical properties. The hardening and tempering process involves heating the material to a specific temperature and then quenching it in oil or water to achieve the desired hardness, followed by tempering at a lower temperature to improve ductility and toughness.

Hardened and tempered EN42J spring steel strips are commonly used in the production of a wide range of springs, such as clock springs, flat springs, and suspension springs. They are also used in the manufacturing of saw blades, knives, and other cutting tools.

Proper handling and storage are important to prevent damage to the material during transport and fabrication. It is recommended to use tools and equipment that are designed for use with spring steel to avoid contamination and damage to the material. Additionally, quality control measures such as testing and inspection should be implemented to ensure that the material meets the required specifications and standards for use in various industries.

Spring steel strip rolls are narrow, flat-rolled sheets of steel that are characterized by their ability to return to their original shape after being bent, twisted, or deformed. This unique property makes spring steel an ideal material for the production of springs and other components where elasticity and resilience are crucial.

Here are some key features and applications of spring steel strip rolls:

Key Features:

1. High Yield Strength: Spring steel is known for its high yield strength, which allows it to endure significant deformation without permanent deformation.

2. Elasticity: The ability to return to its original shape after being subjected to deformation is a crucial property of spring steel.

3. Heat Treatment: Spring steel can undergo various heat treatment processes to achieve the desired combination of hardness and flexibility.

4. Good Fatigue Resistance: Spring steel is designed to withstand repeated loading and unloading cycles without failure.

Applications:

1. Springs: The primary application of spring steel strip rolls is in the manufacturing of springs for a wide range of industries, including automotive, electronics, and machinery.

2. Fasteners: It is used in the production of fasteners such as clips, washers, and retaining rings where a high degree of elasticity is required.

3. Cutting Tools: Spring steel is used in the production of cutting tools and blades where toughness and durability are essential.

4. Automotive Components: Springs in suspension systems, clutch systems, and various other automotive components are often made from spring steel.

5. Electronics: Certain electronic components, such as contacts and connectors, may use spring steel for its electrical conductivity and resilience.

6. Textile Industry: Spring steel strip rolls are sometimes used in the textile industry for applications like flat springs in looms.

Considerations:

1. Material Grades: Different grades of spring steel are available, each with its own set of properties. Common grades include 1075, 1095, and 5160.

2. Surface Finish: Depending on the application, the surface finish of the spring steel strip may be important for corrosion resistance and overall performance.

3. Heat Treatment: Heat treatment processes, such as quenching and tempering, can be employed to achieve specific mechanical properties.

Additional Information:

• Packaging Details: AS PER REQUIREMENT

Spring Steel Annealed Coil

Overview

Spring steel annealed coil is a type of steel known for its high yield strength and excellent fatigue properties. Annealing involves heating the steel and then cooling it slowly to remove internal stresses and improve ductility and workability. This makes the material easier to form and machine before it undergoes final hardening processes to achieve the desired spring properties.

Key Features

1. Enhanced Ductility:

   • The annealing process makes the steel more ductile, allowing it to be easily formed and machined into desired shapes.

2. Uniform Structure:

   • Annealing creates a uniform microstructure, reducing internal stresses and enhancing the material's overall mechanical properties.

3. Improved Machinability:

   • Easier to cut, shape, and form compared to hardened spring steel, facilitating complex manufacturing processes.

4. Prepares for Hardening:

   • Ideal for subsequent heat treatment processes to achieve high hardness and tensile strength required for springs.

Chemical Composition

The exact composition can vary depending on the specific type of spring steel, but common elements include:

• Carbon (C): 0.45-1.00%
• Manganese (Mn): 0.30-1.20%
• Silicon (Si): 0.10-0.35%
• Chromium (Cr): 0.50-1.00%
• Nickel (Ni): May be present in some grades for additional toughness.

Mechanical Properties

• Tensile Strength: Typically ranges from 500 to 800 MPa (72.5-116 ksi) in the annealed condition.
• Yield Strength: Generally lower than tensile strength, indicative of higher ductility.
• Elongation: Typically around 20-30%, showing good ductility.
• Hardness: Relatively low in the annealed state, around Rockwell B70-B90.

Manufacturing Processes

1. Annealing:

   • Description: Heating the steel to a specific temperature (often between 700°C and 800°C) and then cooling it slowly.
   • Benefits: Relieves internal stresses, enhances ductility, and prepares the material for further forming or machining.

2. Cold Rolling:

   • Description: After annealing, the steel may be cold-rolled to achieve the desired thickness and surface finish.
   • Benefits: Provides a smooth surface and consistent thickness, important for precise applications.

3. Heat Treatment:

   • Description: Once formed, the steel can undergo heat treatment processes like hardening and tempering to achieve final spring properties.
   • Benefits: Enhances hardness, tensile strength, and elasticity, essential for spring functionality.

Applications

1. Automotive Industry:

   • Suspension Springs: Used in the manufacture of suspension springs that require precise forming and high strength after hardening.
   • Valve Springs: Ideal for valve springs that need to maintain their shape and strength under high-stress conditions.

2. Industrial Equipment:

   • Machinery Springs: Used in various machinery parts where springs are needed to absorb shock and maintain tension.
   • Fasteners: Formed into clips, fasteners, and other components requiring precision and strength.

3. Construction:

   • Architectural Springs: Applied in architectural components that require flexibility and durability.
   • Building Support: Used in load-bearing structures where elasticity and strength are critical.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: AS REQUIRED

Bright annealed steel strip is a type of steel strip that has undergone a specific heat treatment process to improve its surface finish and mechanical properties. Here are the key features and details about bright annealed steel strip:

 

 Features and Characteristics

 

1. Surface Finish:

   - The bright annealing process gives the steel strip a smooth, shiny, and reflective surface. This finish is aesthetically appealing and reduces the need for further finishing processes.

 

2. Corrosion Resistance:

   - The bright annealing process enhances the corrosion resistance of the steel strip, making it suitable for applications where exposure to corrosive environments is a concern.

 

3. Mechanical Properties:

   - Bright annealed steel strips have improved mechanical properties, including increased strength and ductility, which make them versatile for various applications.

 

4. Dimensional Accuracy:

   - The process ensures high dimensional accuracy and uniform thickness across the strip, which is critical for precision applications.

 

 Manufacturing Process

 

1. Cold Rolling:

   - The steel strip is cold-rolled to achieve the desired thickness and improve its mechanical properties.

 

2. Annealing:

   - The cold-rolled strip is then subjected to a bright annealing process. This involves heating the steel in a controlled atmosphere furnace to a specific temperature and then cooling it down slowly.

   - The controlled atmosphere prevents oxidation and ensures a bright, clean surface finish.

 

3. Final Finishing:

   - After annealing, the strip may undergo additional processes such as trimming, slitting, and inspection to meet specific customer requirements.

 Applications

1. Automotive Industry:

   - Used in manufacturing automotive parts that require high strength and excellent surface finish, such as trims, moldings, and structural components.

2. Consumer Goods:

   - Applied in the production of household appliances, kitchen utensils, and other consumer products where appearance and corrosion resistance are important.

3. Electronics:

   - Used in electronic components that require precision and reliability.

4. Medical Devices:

   - Suitable for medical instruments and devices due to its clean surface and biocompatibility.

5. Construction:

   - Employed in architectural elements and building materials that benefit from its aesthetic appeal and durability.

 Advantages

1. Aesthetic Appeal:

   - The bright, reflective surface is visually appealing and often eliminates the need for additional surface finishing.

2. Enhanced Corrosion Resistance:

   - Improved resistance to rust and corrosion, making it suitable for harsh environments.

3. Improved Mechanical Properties:

   - Enhanced strength and ductility allow for versatile applications and better performance in demanding conditions.

4. Consistency and Precision:

   - High dimensional accuracy and uniformity are maintained throughout the production process, ensuring consistent quality.

 Summary
Bright annealed steel strip is a versatile and high-quality material used in various industries due to its excellent surface finish, enhanced corrosion resistance, and improved mechanical properties. The bright annealing process ensures that the steel strip meets stringent quality standards, making it suitable for precision applications in automotive, consumer goods, electronics, medical devices, and construction industries.

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

Properties:

• Edges Sheared
• Finish Grey, bright polished, or blue
• Flatness 0.025mm Max per 25mm of width

 

Applications:

• Power springs
• Flat springs
• Coil springs
• Wood cutting band saw blades
• Handsaw blades
• Masonry tools
• Gardening tools
• CLOCK SPRINGS
• Doctor blades
• Cutting blades
• Washers
• Wave washers
• Spring components with less bending
• Rolling shutter springs for doors and windows
• Loom drop pins
• Textile heald frames
• Horn diaphragm
• Clutch parts
• Door closure springs
• Valve plates
• Compressor parts
• Shock absorber washers

 

Model Overview:
 
Technical Details:


 

Additional Information:

• Delivery Time: SAME DAY READY STOCK
• Packaging Details: AS REQUIRED

C45 Medium Carbon Steel Strips – Cold Rolled, Annealed & Hardened

High Strength Strips for Precision Engineering, Springs & Blades
Supplier & Stockist – Vijay Laxmi Impex, India

Product Description:
Vijay Laxmi Impex offers high-quality C45 Medium Carbon Steel Strips, ideal for industrial applications that require a combination of strength, hardness, and moderate ductility. With approximately 0.45% carbon content, C45 grade steel offers excellent wear resistance and tensile strength, making it a preferred choice for parts that undergo repetitive mechanical stress.

Our C45 strips are available in cold rolled, annealed, or hardened & tempered (H&T) conditions, and can be customized as per the required thickness, width, edge finish, and mechanical properties. The cold rolling process provides a smooth finish, consistent flatness, and tight dimensional tolerances, suitable for stamping, punching, and forming.

✅ Key Product Features:

• Grade: C45 (Equivalent to EN8 / AISI 1045 / CK45)

• Carbon Content: ~0.42–0.50%

• Thickness: 0.20 mm to 4.00 mm

• Width: 10 mm to 300 mm

• Hardness (Annealed): ~170–210 BHN

• Hardness (H&T): 45–50 HRC (on request)

• Surface Finish: Bright / Blue / Natural / Grey

• Edge Condition: Slit Edge / Deburred / Rounded

• Form: Strip, Coil, Sheet, or Custom Cut-to-Length

🛠️ Applications of C45 Steel Strips:

• Flat springs and spring retainers

• Circular saw blades and knives

• Stampings and press tools

• Lock components and clamps

• Shims and machine spacers

• Automotive and agricultural machinery parts

📐 Benefits of C45 Medium Carbon Steel:

• High surface hardness after hardening

• Good strength-to-cost ratio

• Excellent machinability in annealed state

• Uniform mechanical properties across strip

• Suitable for surface hardening and flame treatment

• Excellent wear resistance for cyclic applications

📦 Packaging & Delivery:

• Neatly bundled with HDPE wrap and edge guards

• Wooden pallet packaging for export shipments

• Batch-wise labeling for easy traceability

• Minimum Order Quantity: 100 kg

• Prompt PAN India delivery (3–7 working days)

🏢 Why Choose Vijay Laxmi Impex?

• Expert in supplying cold rolled & heat-treated steel strips

• Customized dimensions, hardness, and edge finish available

• In-house slitting, annealing, and tempering facilities

• Mill Test Certificates (MTC) provided for every order

• Trusted partner for engineering, tooling, and auto sectors

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX

Spring Steel Annealed Strip is a low-carbon to medium-carbon steel strip that has been fully annealed to reduce internal stresses and improve workability. This material offers excellent formability, easy bendability, and smooth surface finish, making it suitable for components that require further machining, shaping, or stamping before heat treatment.

It is widely used in manufacturing of precision parts, clips, washers, blades, hardware items, automotive components, cutting tools, and various engineering applications. Annealing ensures uniform mechanical properties across the strip, allowing consistent performance during production and enabling high-quality finished parts after subsequent hardening or tempering processes.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: AS PER REQUIRED

Annealed steel strips are steel strips that have undergone an annealing process, which is a heat treatment technique. The purpose of annealing is to soften the steel, improve its ductility, relieve internal stresses, and refine its grain structure. This makes the steel more workable and easier to form, bend, or machine.
1. Annealing Process

Annealing is a heat treatment process that involves three key stages:

• Heating: The steel is heated to a specific temperature, typically between 700°C and 900°C (depending on the steel's composition). This temperature is above the steel's recrystallization temperature but below its melting point.

• Holding (Soaking): The steel is held at the annealing temperature for a certain period, allowing the material to reach thermal equilibrium. This duration can range from a few minutes to several hours, depending on the thickness and desired properties.

• Cooling: The steel is then slowly cooled, usually in a controlled environment such as a furnace. Slow cooling is crucial as it allows the internal structure of the steel to reorganize into a more stable, softer state.

2. Types of Annealed Steel Strips

• Full Annealed Steel Strips: Involves heating the steel to a temperature that fully transforms its microstructure, followed by slow cooling. The result is a material with maximum softness and ductility.

• Process Annealed Steel Strips: This is a less intensive form of annealing, often used to soften steel that has been work-hardened. It involves heating the steel to a lower temperature than full annealing, followed by slow cooling.

• Spheroidized Annealed Steel Strips: This process is used to produce a very soft steel strip, particularly in high-carbon steels. The annealing process forms spherical carbides within the steel, making it easier to machine and form.

3. Advantages of Annealed Steel Strips

• Improved Workability: The softness and ductility of annealed steel make it easier to machine, cut, bend, and shape without cracking or breaking.

• Enhanced Surface Quality: Annealing helps in achieving a smoother, more uniform surface, which is critical for applications where surface finish is important.

• Dimensional Stability: The process reduces internal stresses, leading to better dimensional stability during subsequent processing or use.

• Extended Tool Life: In machining operations, the reduced hardness of annealed steel extends the life of cutting tools.

4. Applications of Annealed Steel Strips

• Automotive Industry: Annealed steel strips are used in the manufacture of parts that require precision and flexibility, such as springs, clamps, and brackets.

• Electrical Industry: In electrical applications, annealed steel strips are commonly used in the production of transformer cores, electrical relays, and other components where magnetic properties are critical.

• Packaging: The ductility and formability of annealed steel make it ideal for manufacturing metal packaging, such as cans and containers.

• Home Appliances: Annealed steel is used in the production of kitchen utensils, tools, and other appliances due to its easy workability and smooth finish.

• Construction and Industrial Components: Annealed steel strips are used to produce a wide range of industrial components, including washers, fasteners, and structural parts.

5. Common Grades of Annealed Steel

• High Carbon Steel (e.g., 1095): Used in applications requiring higher strength and hardness after cold working, such as in tools and knives.

This is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from this strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches. These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various option as per requirement of customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

Properties:

• Edges Sheared
• Finish Grey, bright polished, or blue
• Flatness 0.025mm Max per 25mm of width

 

Applications:

• Power springs
• Flat springs
• Coil springs
• Wood cutting band saw blades
• Handsaw blades
• Masonry tools
• Gardening tools
• CLOCK SPRINGS
• Doctor blades
• Cutting blades
• Washers
• Wave washers
• Spring components with less bending
• Rolling shutter springs for doors and windows
• Loom drop pins
• Textile heald frames
• Horn diaphragm
• Clutch parts
• Door closure springs
• Valve plates
• Compressor parts
• Shock absorber washers

 

Model Overview:

Technical Details:

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: AS REQUIRED

C62 Annealed Spring Steel – Sheets, Strips & Coils

Supplied by Vijay Laxmi Impex – Reliable Supplier of Quality Spring Steel Materials

Product Overview:
Vijay Laxmi Impex offers high-grade C62 Annealed Spring Steel in the form of sheets, strips, and coils, suitable for a wide range of industrial applications. C62 is a medium-high carbon steel with approximately 0.62% carbon content, known for its good formability, strength, and ability to be further heat-treated. In its annealed condition, C62 spring steel is soft, ductile, and easy to machine or form, making it ideal for components that require subsequent hardening and tempering.

Our C62 steel is precisely manufactured and processed to ensure consistent mechanical properties, clean surface finish, and dimensional accuracy.

Technical Specifications:

• Grade: C62 (Equivalent to EN 9 / DIN CK60 / AISI 1065)

• Condition: Annealed (Soft)

• Carbon Content: ~0.60% to 0.65%

• Thickness Range: 0.30 mm to 5.00 mm (customizable)

• Width Range: As per customer requirement

• Hardness (Annealed): 160–200 BHN

• Form: Sheets, Strips, Coils, or Cut Lengths

• Finish: Bright, Blue, or Natural

• Edges: Mill, Slit, or Rounded

• Standard: IS 2507 / EN standards / As per customer spec

Key Features:

• Excellent machinability and cold formability

• Uniform grain structure for reliable heat treatment

• Ideal base material for hardening and tempering

• Clean and smooth surface finish

• Good dimensional tolerance and flatness

• Custom sizes available for diverse industry use

Applications of C62 Annealed Spring Steel:
C62 steel in its annealed form is used where flexibility in machining or forming is required before hardening. Typical applications include:

• Leaf springs and flat springs

• Agricultural tools and blades

• Hand tools and cutting parts

• Automotive components

• Clips, washers, and locking parts

• General engineering parts

• Tool blanks and wear strips

Packaging & Supply Details:

• Supplied in coil form, sheet form, or custom cut lengths

• Export-worthy packaging: HDPE wrap, wooden pallets, strapping

• Proper labeling with grade, size, batch number, and traceability

Why Choose Vijay Laxmi Impex?

• Trusted name in steel product supply with years of industry experience

• High-quality raw material sourced from certified mills

• Strict quality checks at every stage

• Ready stock and quick delivery

• Tailored solutions as per customer requirements

• PAN India supply and global export capabilities

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: HDPE Wrap / Wooden Pallet / Export-Grade Bundle

C45 Spring Steel Coils

We supply high-quality C45 Spring Steel Coils with excellent mechanical properties and durability, ideal for manufacturing springs, blades, tools, and various engineering components. C45 is a medium carbon steel grade known for its high strength, good machinability, and excellent wear resistance after heat treatment.

Key Features:

• Material Grade: C45

• Finish: Annealed / Hardened & Tempered (as per requirement)

• Thickness & Width: Available in various sizes or custom as per buyer’s demand

• High tensile strength and toughness

• Excellent wear resistance and fatigue life

Applications:
Used in springs, cutting tools, automotive parts, industrial blades, and general engineering purposes.

We offer ready stock with competitive prices and prompt delivery across India.

Additional Information:

• Delivery Time: READY STOCK!
• Packaging Details: AS PER REQUIREMENT.

Annealed Spring Steel Strips C80

C80 Annealed Spring Steel Strips are high carbon steel strips that have been cold rolled and spheroidized annealed to achieve excellent formability, ductility, and consistent surface finish. This condition makes the material ideal for further heat treatment, hardening, and tempering as per end-use requirements.

Key Features:

• Grade: C80 (Equivalent to EN42B / AISI 1080)

• Condition: Cold Rolled & Spheroidized Annealed

• Thickness Range: 0.20 mm to 3.00 mm (custom sizes available)

• High carbon content for superior strength after hardening

• Excellent flatness and dimensional accuracy

• Smooth, bright finish for precise forming operations

Applications:
Widely used in the manufacture of springs, saw blades, clutch plates, knives, measuring tapes, and other components requiring high strength and flexibility after hardening and tempering.

Additional Information:

• Delivery Time: READY STOCK!
• Packaging Details: AS PER REQUIREMENT.

We offer premium quality Annealed Spring Steel Strips made from high-carbon steel, designed for excellent formability, machinability, and further hardening as per application requirements. The annealed condition ensures the strips are soft and ductile, making them easy to cut, bend, stamp, or form into desired shapes.

Key Features:

• Material Grade: EN42, C80, or as per customer requirement

• Condition: Annealed (Soft)

• Thickness Range: 0.10 mm to 3.00 mm

• Width: As per buyer’s specifications

• Finish: Smooth, scale-free surface

• High dimensional accuracy and consistency

• Suitable for heat treatment, hardening, and tempering

Applications:

• Automotive components

• Industrial springs and clips

• Tools and blades

• Washers, fasteners, and hardware parts

• General engineering applications

Why Choose Us:

• Customized sizes and grades available

• Competitive pricing

• Timely delivery across India

• Quality assured with material test certificates

Additional Information:

• Delivery Time: READY STOCK!
• Packaging Details: AS PER REQUIREMENT

Cold Rolled Medium & High Carbon Steel Strips

Precision-Engineered Steel Strips for Springs, Blades & Automotive Use
Manufacturer & Supplier – Vijay Laxmi Impex, India

Product Description:
Vijay Laxmi Impex offers a wide range of Cold Rolled Medium and High Carbon Steel Strips, designed for applications that demand superior strength, elasticity, and wear resistance. Using precision cold rolling technology, we process steel grades like C45, C55, C62, C75, C80, EN42J, and SK5 to meet the stringent requirements of the spring, blade, automotive, and tool industries.

These steel strips are available in both annealed and hardened & tempered (H&T) conditions. Cold rolling ensures tight thickness tolerances, smooth surface finish, and excellent flatness, making them ideal for forming, stamping, heat treatment, and cutting operations.

✅ Key Features:

• Grades: C45, C55, C60, C62, C75, C80, EN42J, CK75, SK5

• Carbon Content: 0.45% to 0.85%

• Condition: Annealed / Hardened & Tempered

• Thickness: 0.20 mm to 4.00 mm

• Width: 10 mm to 300 mm

• Hardness (H&T): 44–52 HRC (grade dependent)

• Surface Finish: Bright, Blue, Grey, or Natural

• Edge Types: Slit Edge / Deburred / Round Edge

• Form: Coil, Strip, Sheet, or Custom Cut Lengths

🔩 Mechanical Advantages:

• High tensile strength and fatigue resistance

• Uniform grain structure and flatness

• Suitable for precise stamping, bending, and forming

• Excellent spring-back characteristics

• Dimensional accuracy with consistent performance

🛠️ Applications:

• Flat springs and spiral springs

• Hacksaw blades, knives, and cutting tools

• Automotive clutch plates and shims

• Press parts and industrial clips

• Lock parts, washers, and agricultural tools

• Electrical components and measuring tapes

📦 Packaging & Logistics:

• Bundled with HDPE wrap & edge protection

• Export-standard wooden pallets available

• MOQ: 100 kg

• PAN India supply & export-ready

• Fast delivery (3–7 working days based on stock)

🏆 Why Vijay Laxmi Impex?

• Over a decade of expertise in spring and carbon steels

• Advanced cold rolling and in-house slitting facility

• Customized hardness, width, and edge conditions

• Mill Test Certificates (MTC) for every batch

• Serving OEMs, exporters, and engineering units across India

C55 Grade Cold Rolled Annealed Steel Strips | Manufacturer & Supplier – Vijay Laxmi Impex

Vijay Laxmi Impex is a reliable manufacturer, stockist, and supplier of C55 Grade Cold Rolled Annealed Steel Strips, offering consistent quality, precise dimensions, and excellent mechanical properties for demanding industrial applications.

Our C55 cold rolled annealed strips are produced from high-carbon steel with controlled chemistry, ensuring uniform softness, superior surface finish, and enhanced formability. These strips are ideal for applications requiring subsequent forming, bending, stamping, or heat treatment.

🔹 Key Features of C55 Cold Rolled Annealed Strips

• High carbon content (~0.50–0.60%) for strength and durability

• Cold rolled process for smooth surface and close thickness tolerance

• Annealed condition for excellent ductility and workability

• Uniform hardness and microstructure

• Suitable for further hardening, tempering, or machining

🔹 Available Specifications

• Grade: C55 Carbon Steel

• Condition: Cold Rolled & Annealed (CR Annealed)

• Thickness Range: As per customer requirement

• Width Range: As per slitting specification

• Form: Coils / Cut-to-length strips

• Edge Condition: Mill edge / Slit edge (optional)

🔹 Applications

• Automotive components

• Precision engineering parts

• Washers, clips, springs (after heat treatment)

• Hand tools and hardware components

• Agricultural and industrial machinery parts

🔹 Why Choose Vijay Laxmi Impex?

✔ Consistent material quality
✔ Accurate slitting and dimensional control
✔ Ready stock & custom sizes available
✔ Competitive pricing
✔ Timely delivery across India

Vijay Laxmi Impex supplies C55 Grade Cold Rolled Annealed Steel Strips suitable for OEMs, fabricators, and industrial buyers looking for dependable performance and value.

📞 Contact us today for the best price, datasheet, or trial order.

Additional Information:

• Delivery Time: READY IN STOCK
• Packaging Details: AS PER REQUIRED

CRCA Spring Steel Strips

Our CRCA Spring Steel Strips are produced from premium-quality cold rolled close annealed steel, ensuring excellent surface finish, uniform thickness, and reliable mechanical strength. These strips combine superior ductility and formability with high precision, making them ideal for applications requiring consistent spring performance and durability.

Key Features:

• Made from high-grade CRCA steel

• Smooth and bright surface finish

• Excellent formability and dimensional accuracy

• Uniform hardness and mechanical properties

• Available in various thicknesses, widths, and coil forms

Applications:
Used in manufacturing of springs, clips, washers, lock parts, and other precision automotive and industrial components

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: AS PER REQUIREMENT